Aviation Access Solutions

Cagsan Technic provides customised access solutions  in the field of aviation with high quality and secure structure. Our products, simplifies the operational process and enable efficient work.

 

Our products are designed by our expert engineer staff on fixed-height / height-adjustable maintenance platforms, nose / tail dock systems and fuel filling stairs.

Quality is created during the planning & project phase. The development of production systems and technologies are closely monitored and systematically integrated into the company structure.

Cagsan Technic, as a mission, guarantees to maintain its strong position in the Occupational Health and Safety sector and to support the use of quality and secure access products.

1/3

Our Products are produces in accordance with  EN 131-1-2-3 , EN 131-7 ,ISO 12100 , EN1915-1 , EN 12312-8  norms.

 

I. MAINTENANCE PLATFORMS WITH FIXED HEIGHT

Product width, length and height can be manufactured in the desired dimensions.

In order to prevent damage to the aircraft, the areas that come into contact with the aircraft are covered with rubber bumper. Full industrial stabilizers are used to secure the platform to the ground.

The step surface may vary depending on the area of ​​use and the need. Step width can be optionally selected from 80 mm to 250 mm.

Guardrails can be manufactured in a fully foldable structure.

Toeboard can be added to prevent materials from falling down.

Additional safety measures such as coloring, reflectors, warning labels can be added to the product

1/1

Our Products are produces in accordance with EN 131-1-2-3 , EN 131-7 ,ISO 12100 , EN1915-1 , EN 12312-8 norms.

 

II- MAINTENANCE PLATFORMS WITH ADJUSTABLE HEIGHT

Product width, length can be manufactured in the desired dimensions.

The height of the platform can be easily adjusted with the MANUAL / ELECTRIC HYDRAULIC / PULLEY or RACK SYSTEM.

The steps are designed parallel to the ground at all heights.

In order to prevent damage to the aircraft, the areas that come into contact with the aircraft are covered with a rubber bumper.

Additional safety lock is included. Full industrial stabilizers are used to secure the platform to the ground. The step surface may vary depending on the area of ​​use and the need. Step width can vary from 80 mm to 250 mm.

Guardrails can be manufactured in a fully foldable structure.

Teoeboard can be added to prevent materials from falling down.

Additional safety measures such as coloring, reflectors, warning labels can be added to the product.

 

Additional door, tow bar extension, high capacity wheel options are offered.

1/1

Our Products are produces in accordance with EN 131-1-2-3 , EN 131-7 ,ISO 12100 , EN1915-1 , EN 12312-8 norms.

 

III- NOSE DOCK SYSTEMS

With the nose dock system, windshield, radome, wheel housing and electronic components can be reached.

It is manufactured at an angle to completely surround the nose of the aircraft. Product width, length and height can be manufactured in the desired dimensions.

It can be manufactured as single, double or triple models.

All parts can be easily connected and disconnected. It can be produced optionally with sliding parts for use in different aircraft types.

In order to prevent damage to the aircraft, all areas that come into contact with the aircraft are coated with a rubber bumper.

Full industrial stabilizers are used to secure the platform to the ground. The non-slip step surface may vary depending on the area of ​​use and need.

The stair width can vary between 80 mm - 250 mm.

Guardrails can be manufactured in a fully foldable structure.

In order to prevent the materials from falling down, toeboard can be added.

Additional safety measures such as coloring, reflectors, warning labels can be added to the product.

1/1

Our Products are produces in accordance with  EN 131-1-2-3 , EN 131-7 ,ISO 12100 , EN1915-1 , EN 12312-8 norms.

 

IV- TAIL DOCK SYSTEM

Tail dock system, flight control unit, APU system, rear doors are easily accessible. It is manufactured at an angle to fully surround the tail of the aircraft.

Product width, length and height can be manufactured in the desired dimensions. It can be produced as single or double model.

All parts can be easily connected and disconnected.

It can be produced optionally with sliding parts for use in different aircraft types.

In order to prevent damage to the aircraft, all areas that come into contact with the aircraft are coated with a rubber bumper.

Full industrial stabilizers are used to secure the platform to the ground. The non-slip step surface may vary depending on the area of ​​use and need

.

The stair width can vary between 80 mm - 250 mm.

Guardrails can be manufactured in a fully foldable structure.

In order to prevent the materials from falling down, toeboard can be added.

Additional safety measures such as coloring, reflectors, warning labels can be added to the product.

1/1

Our Products are produces in accordance with   EN 131-1-2-3 , EN 131-7 ,ISO 12100 , EN1915-1 , EN 12312-8 norms.

 

V- REFUELLING EQUIPMENT

It provides fast, safe and easy refueling for all aircraft types at high wind speeds.

Product width, length and height can be manufactured in the desired dimensions.

The non-slip step surface may vary depending on the area of ​​use and need. Step width can vary from 80 mm to 250 mm.

Toeboard can be added to prevent materials from falling down.

Additional safety measures such as coloring, reflectors, warning labels can be added to the product.

Fuel hose hanging equipment can be added.

1/1

Our Products are produces in accordance with  EN 131-1-2-3 , EN 131-7 ,ISO 12100 , EN1915-1 , EN 12312-8 norms.